***************************************************** Anti Glare AUTO SunVior FAQ ... How many parts does the AGS (Anti Glare System) consist of? Answer: It consists of an LCD screen, a control circuit, a photosensitive sensor and some brackets, etc
|  | What is the installation and applicable auto type for the AGS (Anti Glare System)? Answer: It depends on the AGS type.There are general type and special type.
1. The general type can be installed into any auto types. The
installation will be finished within 30sec.
2. The special type is designed for specific vehicle models and
need professional installation.
|  | What main functions does the AGS (Anti Glare System) have? Answer: It can prevent visual over-stimulation or dizziness caused
by sudden brightness duringDaytime solar glare driving and night
driving or snow reflection. In addition, it can greatly improve
safety and comfort.
| | What is the basic operation principle of theAGS (Anti Glare System)? Answer: Optical signals received from in front of the driver are
converted to electric signals through the photosensitive sensor.
These signals are processed by microcircuit in order to provide the
driving signals for the LCD screen. The result is the systemchanges its transparency instantaneously with respect to the exterior light
environment, allowing the driver to avoid visual over-stimulationor
glaring caused by sudden brightness in either daytimeornightivingor
snow reflection. It therefore can greatly improve safety and comfort
| | Brief introduction for usage of theAGS (Anti Glare System) ? Answer: Adjust the screen of the System such that it is approximately perpendicular to the driver's view and switch the system on. When the mode switch is in the off position, it indicates night mode; when the mode switch is in the on position, it indicates the day mode.
|   | Is it possible for the driver to be hurt in case theAGS (Anti Glare System) is heavily hit? Answer: Generally, it will not do harm to the driver. When the System is heavily hit or broken, both sides of the conductive glass are sandwiched between protective plastic coatings that prevent any glass fragments from escaping, so the system is safe on most occasions.
| | How to deal with the AGS if it becomes lesser responsive after long usage? Answer: This may occur after using the system three months to one year. It indicates that the two AAA batteries need to be replaced.
| | What should the driver do when driving at night in the absence of bright lights if the driver feels that the AGS is a little too dark (especially after two autos are meeting)? Answer: First of all, like any other new product, there is an adaptation process when first being used. During this period, the driver can adjust the position of the product push slightly away from the normal perpendicular position to increase the transparency of the AGS and increase the light passing through.
| | bit higher than his visWhen using the general type product, the driver may find the AGS (Anti Glare System) a little ion, what should he do in such a case? Answer: Adjust the adjustable part to the right place.
| | How long is the service period of the AGS (Anti Glare System)? Answer: It will be over 10 years according to its technical parameters.
| | What is the AGS LCD screen? Answer: It is by no means a piece of ordinary glass. It is made from special materials and designed with special circuitry. Two protective plastic coatingsandwiching with a special liquid crystal material injected in between. Thus, it is a new-patented product, which changes transparency according to the outside optical intensity.
| | What market attractions and technological advantages does this AGS (Anti Glare System) represent?
Answer: 1. It provides a comfortable visual environment by daytime
2. Based on the patented technology of ?self transparency changing? and updated materials and techniques, the System is a high-tech product integrating electronics, optics, colourometry, computerized automatization and LCD technology.
3. Having passed ISO9001 and ISO14001 certification, the System has a leading position internationally and fills a void in the field of automatic visual protection and glare reduction, thus providing a safer visual driving environment.
4. With different modes for day and night, it fully avoids glare 24 hours.The system is a great innovation compared to the traditional shadow shields.It utilizes the latest technology.
| | Is it difficult to install it? Answer : The installation is simple and easy, just take a few minutes. Please click here to see installation DEMO.
|
HID F.A.Q.
What is Xenon light?
The xenon bulb is a micro discharge bulb filled with a mixture of noble gases including Xenon. The bulb has no filament as is the case with a halogen lamp. The light is created by striking and arc between 2 electrodes. The xenon lamp needs a starter for quick ignition and an electronic ballast to function properly. What are the advantages of PureVision HID over traditional halogen bulbs?
More light output
A 35-Watt XENON HID lamp produces up to 3x the lumens at the light source when compared to a 55-Watt halogen bulb.
Whiter light
While the halogen light appears yellowish, the HID lighting system produces a light that is closer to that of natural sunlight.
Increased Visibility
In most night time driving/bad weather situations, this combination of a whiter color and a greater light output allows for a safer and more illuminated drive.
Reduced power consumption
HID lamp systems draw significantly less power from your vehicles electrical system.
Greater product life
HID lamp systems are designed to outlast your vehicle. On average these bulbs will last 3-5 times longer than a traditional halogen bulb.
Distinctiveness
Your vehicle will not only have the latest in automotive lighting technologies, but will also have that unique eye-catching appeal. Currently, only high-end vehicles offer this XENON HID lighting system
Can I re-install the original halogen bulbs after the HID kit has been installed?
With the growing popularity of leasing vehicles, a big concern is whether or not you can bring the vehicle back to its original factory condition. Our kits install with little or no modifications to your vehicle. If need be, the entire kit can be removed and the original halogen bulbs replaced. This kit can be re-installed into another vehicle that uses the same bulb size.
Can I Install the kit myself?
For anyone who is mechanically inclined, this installation is considered do-it-yourself. While a typical installation takes approximately an hour, it can vary depending on application (conversion or auxiliary). Our kits are ready to install right-out-of-the-box and come complete with everything that you will need. We also provide you a full set of easy-to-read, step-by-step instructions to guide you.
I have Angel eyes right now, can a HID conversion kit still be installed?
Yes HID conversion kit will fit cars with angel eyes, however we do recommend that this installed is done by a professional fitter.
Why can I not just replace the halogen bulb in my vehicle with HID lamps with out having to purchase the entire kit?
Motorcycles and automobiles currently use a 12 Volt electrical system for their headlamps. HID lighting systems require over 20,000 volts to ignite the bulbs. Once lit, they only require 12 volts to keep running. Our kits include a power pack that is necessary for the lamps to turn on. The input of the power pack is 12 volts. It is an integral part of the system
How long will these bulbs last?
HID lamps are designed to last for the life of your vehicle. They will run for approx 3000 hours. Our lamp kits and bulbs are made of the finest materials available.
Why was the Xenon bulb developed?
The car over the last decade has been made safer and more comfortable with the introduction of such technologies as ABS, Airbags and Air-conditioning. However 60% of all accidents take place in the dark. Therefore vehicle lighting plays a very big role in road safety. It is a fact that a 60 year old requires 10-11 times the amount of light to perform the same functions as a 20 years old. With the increase in the average age of the population more light is required to drive safely.
Are these HID light systems street legal?
Every country and jurisdiction has its own rules and regulations governing the use of automotive lighting. XENON H.I.D. lighting systems that are supplied with the vehicles from the factory are DOT / E approved. The same OEM manufacturers that supply all the major car companies of the world also make our kits. NO XENON H.I.D. lighting system available from any source is DOT / E approved if installed outside of the factory. These kits are not street legal for use on public roads as they are. As a result, we officially endorse the kit for exhibition and off-road use and will only sell the kit to be used for these purposes. We are not responsible for customers who violate the terms of sale in which they will assume all responsibilities for any unauthorized or unintended use other than exhibition or off-road use.
Where can I get HID conversion kits fitted?
XenonEyes recommend the installation to be done by a professional fitter if you have no experience working with cars
INSTALLATION Operation principle of the products: | Inside the quartz tube of the light was filled with chemical gases most of which are inert gases such as xenon, iodides and so on. Through the ballast, then 12V DC will increase immediately: the electrons of the xenon in the tube will be dissociated because of the voltage swing and thus an electrical arc happens between the two poles.
Xenon light is power saving, sage and has long life, high luminance. In addition, because of the use of the UV-cut quartz tube, the light is crystal forever. | Its unique safety design: | Driving safely can be enhanced greatly for the light is equipped with short-circuit protection device, contra-pressure protection design.Therefore,the light has been in the favor of the automobile modification fans from Europe,U.S., Japan, South Korea and Southeast Asia etc. | Install instructions: | 1. Turn off the switch, unfold the engine after the car cool, remove the same type of bulbs in the discharge light group to take the place of the original halogen bulbs and then plug all cables attached into the sockets and ballast related. Mustn’t touch the surface of HID bulb with hands. If it is dirty, it should be cleaned with the rag; | 2. Changing the fuse in the circuit of the car into the fuse special for HID; | 3. Before installation, check whether the bulb can touch the inner cover of the light or the opening is too small. If so, install after proper adjustment. | 4. Put the bulb into the light cover carefully with no damaging force, and then stabilize it and put the waterproof ring to the original. | 5. After installation is over, connect the bulb with the ballast. | 6. Fix the ballast in the proper lace (careful for 3M double-face glue is very sticky); | 7. Connect high-voltage line with the bulb. Connect the input line of the ballast with the socket of the light, and make the ballast firmed.(Keep in mind: Must be far away from high temperature and the place is in bad heat dispel) The former factory car light HID all put under the headlight; | 8. Check whether the bulb is fixed the cables between the bulb and the ballast is fastened. | 9. Plug the cable from the voltage ballast into the engine. | 10. Please pay attention to keep the space with the ballast. Don’t approach the following positions; otherwise HID light will be overheated so as to go out:
（A）The Mars is filled in and filled with the Mars in the circuit.
（B）Circuit of the electronic carburetor.
（C）Water tank, and the high temperature of engine.
（D）Choose the position that ventilate and dispel the heat better.
（E）Avoid the position that water accumulated, leaked. | 11. Please confirm whether the length and width of light will touch lens hood and enter of lamp (Model H7 light please attention to the length, Model H1 light should be pay attention to width) If it is contacted, repair it properly avoid the high-tension electricity from leaking; | 12. Turn the power supply, test the lights; turn off the power supply, clear the cables; retest once, then turn on the headlight. | 13. Notes for all distributors and retailers: we suggest BORA, BLUEBIRD and FAMILY should be fixed with H4 H/L double tube not H4 H/L Single tube. | Note: The user should ask the technician from the retailers to do the installation. Before the installation is over, working with electricity is forbidden. Do not look directly at the light. In addition, as the light tube is very hot, no touch is allowable. As the light is so bright, choose the proper CT according to the local laws or regulations. After sale, the company is not bear any responsibilities related. |
|
